Wolfgeorge
- Wolfgeorge
- sharpshooter
- Messages : 116
- Inscription : 04 mars 2012 19:09
- Localisation : Greece
Wolfgeorge
A small preview, I'll take better photo's of the rest and I'll upload them
Ares CheyTac M200
SG Barett M82
Asahi WA2000 DX
Real Sword SVD
Tanaka M700
Here's my WA2000 collection
Top to bottom
Geneth WA2000
Ares WA2000
Asahi WA2000 DX
Asahi WA2000 STD (now sold)
The 2 Asahi's
Wolf
Ares CheyTac M200
SG Barett M82
Asahi WA2000 DX
Real Sword SVD
Tanaka M700
Here's my WA2000 collection
Top to bottom
Geneth WA2000
Ares WA2000
Asahi WA2000 DX
Asahi WA2000 STD (now sold)
The 2 Asahi's
Wolf
Asahi WA2000 DX & Asahi M40 user
- Big moustache
- one shot one out !
- Messages : 629
- Inscription : 08 févr. 2010 19:25
- Localisation : Paname
Re: Wolfgeorge's armory
J'en connais un qui va tirer une langue.
N'est ce pas Blackangel
B.m.
N'est ce pas Blackangel
B.m.
- Wolfgeorge
- sharpshooter
- Messages : 116
- Inscription : 04 mars 2012 19:09
- Localisation : Greece
Re: Wolfgeorge's armory
I recently sold one of the Asahi WA2K
At least I replaced it with something unique
By the way I've talked to Blackangel!
Wolf
At least I replaced it with something unique
By the way I've talked to Blackangel!
Wolf
Asahi WA2000 DX & Asahi M40 user
- groquik
- one shot one out !
- Messages : 4260
- Inscription : 11 avr. 2004 21:15
- Localisation : Toulouse cong !
Re: Wolfgeorge's armory
the saint graalWolfgeorge a écrit :I recently sold one of the Asahi WA2K
At least I replaced it with something unique
Wolf
powerp
et non, le groquik sauvage n'est pas un prédateur, sauf pour les lapins en chocolat
Re: Wolfgeorge's armory
Il nous avait déja fait un arret sur FA dans la section BAF !Big moustache a écrit :J'en connais un qui va tirer une langue.
N'est ce pas Blackangel
B.m.
Créateur de la "K touch © " .
Fabriquant de copeaux ^^ !
Facebook ? > tape ; 6mmFantome
Fabriquant de copeaux ^^ !
Facebook ? > tape ; 6mmFantome
- Wolfgeorge
- sharpshooter
- Messages : 116
- Inscription : 04 mars 2012 19:09
- Localisation : Greece
Re: Wolfgeorge's armory
Here it is ....
Asahi M40
Upgrade parts:
Asahi upgrade rifled barrel (the stock was strait)
Hard shells (can take over 15 pumps)
Stiffer stricker spring
Moddified pump
I wanted to take better photos ..... And I wanted to post it last
A small comparison between the M40A1 stock I have...
Top to bottom Tanaka, Sun Project, Asahi.
Wolf
Asahi M40
Upgrade parts:
Asahi upgrade rifled barrel (the stock was strait)
Hard shells (can take over 15 pumps)
Stiffer stricker spring
Moddified pump
I wanted to take better photos ..... And I wanted to post it last
A small comparison between the M40A1 stock I have...
Top to bottom Tanaka, Sun Project, Asahi.
Wolf
Asahi WA2000 DX & Asahi M40 user
- Wolfgeorge
- sharpshooter
- Messages : 116
- Inscription : 04 mars 2012 19:09
- Localisation : Greece
Re: Wolfgeorge's armory
Some of my pistols..
Both KSC G18c
WA 1911 w/ Prime SFA V12 alum kit
Wolf
Both KSC G18c
WA 1911 w/ Prime SFA V12 alum kit
Wolf
Asahi WA2000 DX & Asahi M40 user
Re: Wolfgeorge's armory
So cute the gold colt and the silver colt, I fall in love
- Wolfgeorge
- sharpshooter
- Messages : 116
- Inscription : 04 mars 2012 19:09
- Localisation : Greece
Re: Wolfgeorge's armory
WA 1911 with Prime Springfield V12 brass
I was too lazy to polish it when I took these photo's
This how it looks polished
Wolf
I was too lazy to polish it when I took these photo's
This how it looks polished
Wolf
Asahi WA2000 DX & Asahi M40 user
- Wolfgeorge
- sharpshooter
- Messages : 116
- Inscription : 04 mars 2012 19:09
- Localisation : Greece
- Frostcore
- one shot one out !
- Messages : 1359
- Inscription : 11 juin 2010 15:21
- Localisation : Nord
- Contact :
Re: Wolfgeorge's armory
*_*
Vous êtes sûrs que c'est la crise écnomique en grèce ? *_*
Nice collection ! What do you really use ? Don't say "All" !!
Vous êtes sûrs que c'est la crise écnomique en grèce ? *_*
Nice collection ! What do you really use ? Don't say "All" !!
Ghillie 3D Milgrade.
Bar10 full Laylax/PDI !
Membre du GPBL Dunkerque.
Vu sur FA:
marque swiss arms model SA1 bolt. il ne s'agit pas d'un cheap chinois tel qu'un bar 10 donc meilleur qualité de tous les composant d'origine
- Wolfgeorge
- sharpshooter
- Messages : 116
- Inscription : 04 mars 2012 19:09
- Localisation : Greece
Re: Wolfgeorge's armory
I've collect all these in the 4 years I'm playing airsoft, things are becoming tough economically so I won't be able to buy like I used to...
I'm using all (except th SP M40XB and the SG Barrett cause they're not ready yet!) but for target shooting, I've played with most of them.
I've used the Asahi WA2000 but since it's stock the range was pretty bad ( max 60m effective ~40m), it doesn't have a hop up installed yet. I've ordered an SCS barrel for it made by SniperX but USPS lost it!!! I'm waiting a new one but it's not ready yet! I intent to use it in some short and special games!
I WON'T USE the Asahii M40 at all.... This is for target shooting only, I can't say more cause I haven't been able to test it yet due to pretty bad weather, more for that at an up comming review!
I bought the Sun Project M40XB used and broken! I managed to find the spare parts for it after a lot of effort, the gun is ready but I can't find magazines for it! So I'll modify it to accept properly APS2 mags!
The SG Barrett has been completely stripped from ALL internals I'll use a 800mm 6.02 Deep Fire barrel with Systema bucking in a Promytheus Strike NEO hop up. I'll use the PolarStar Fusion engine with it but due the bad SG design I can't mount the engine properly!
This is the gun with the engine installed..
I'm waiting P* to find a way to install the bolt handle/hop up cover.
The base for the bolt handle was attached using the 4 screws at the top of the stock GB, Fusion engine doesn't have the screws simply because it doesn't need it!
P* told me they will find a way to fix this!! I'm waiting an answer from them!
This is athred about it:
http://www.airsoftsniperforum.com/showthread.php?t=3155
Wolf
I'm using all (except th SP M40XB and the SG Barrett cause they're not ready yet!) but for target shooting, I've played with most of them.
I've used the Asahi WA2000 but since it's stock the range was pretty bad ( max 60m effective ~40m), it doesn't have a hop up installed yet. I've ordered an SCS barrel for it made by SniperX but USPS lost it!!! I'm waiting a new one but it's not ready yet! I intent to use it in some short and special games!
I WON'T USE the Asahii M40 at all.... This is for target shooting only, I can't say more cause I haven't been able to test it yet due to pretty bad weather, more for that at an up comming review!
I bought the Sun Project M40XB used and broken! I managed to find the spare parts for it after a lot of effort, the gun is ready but I can't find magazines for it! So I'll modify it to accept properly APS2 mags!
The SG Barrett has been completely stripped from ALL internals I'll use a 800mm 6.02 Deep Fire barrel with Systema bucking in a Promytheus Strike NEO hop up. I'll use the PolarStar Fusion engine with it but due the bad SG design I can't mount the engine properly!
This is the gun with the engine installed..
I'm waiting P* to find a way to install the bolt handle/hop up cover.
The base for the bolt handle was attached using the 4 screws at the top of the stock GB, Fusion engine doesn't have the screws simply because it doesn't need it!
P* told me they will find a way to fix this!! I'm waiting an answer from them!
This is athred about it:
http://www.airsoftsniperforum.com/showthread.php?t=3155
Wolf
Asahi WA2000 DX & Asahi M40 user
- Wolfgeorge
- sharpshooter
- Messages : 116
- Inscription : 04 mars 2012 19:09
- Localisation : Greece
Re: Wolfgeorge's armory
The latest addition in the 1911 collection
Prime Kimber Raptor kit on a WA SCW2 base
Prime Kimber Raptor 2T kit on WA SCW2 base
Detonator SFA V12 kit on TM 1911 base
Creation Kimber TLE/RL II kit on WA SCW3 (WIP)
The kit came without the plunger tube and grip bushings I'm trying too find replacement parts!!
1911 group photo
Wolf
Prime Kimber Raptor kit on a WA SCW2 base
Prime Kimber Raptor 2T kit on WA SCW2 base
Detonator SFA V12 kit on TM 1911 base
Creation Kimber TLE/RL II kit on WA SCW3 (WIP)
The kit came without the plunger tube and grip bushings I'm trying too find replacement parts!!
1911 group photo
Wolf
Asahi WA2000 DX & Asahi M40 user
- Wolfgeorge
- sharpshooter
- Messages : 116
- Inscription : 04 mars 2012 19:09
- Localisation : Greece
Re: Wolfgeorge's armory
Some more...
Sprinfield 1911 V12's
The brass one will be converted to Colt National Match....soon with grip safety, main spring housing and trigger brass.
Wolf
Sprinfield 1911 V12's
The brass one will be converted to Colt National Match....soon with grip safety, main spring housing and trigger brass.
Wolf
Asahi WA2000 DX & Asahi M40 user